Encaustic Technique #7: Smooth Surface Tips

It seems that for many encaustic artists, the smooth surface is like the holy grail. Beeswax painting lends itself to almost instant surface texture. Wonderful, to be sure, and fun to exploit, but sometimes we want something glassy and smooth. Developing a smooth surface especially on any piece over, say, 12″ x 12″, takes patience and restraint. Although I cannot boast a perfectly smooth surface on my paintings, and in fact don’t aim for that, they do fall in the category of smooth rather than textured. I tend to use the smooth texture to contrast with the final touches of paint that I use to create a subtle relief (see above). Here are my tips for working toward a smooth surface in your paintings:

1. I use a heat gun to fuse, and am very careful to not over-fuse. The wax should not be blown around, or you will create a wavy surface. I’ve also read that torches can work well.

2. I use a wide (4″) hake brush to lay down layers of clear beeswax. The hake brushes are inexpensive, and have a fine texture that lays down smooth, thin layers of wax.

3. Scraping the surface from time to time with a razor blade will even out your surface and encourage subsequent layers to go on smoothly. If you use intarsia in your paintings, this will be a built-in texture regulator.

4. When I want to lay down a smooth layer, I turn the heat up on my wax slightly. Usually I keep it at 200 deg. F., but I’ll turn it up to 220 or so for brief periods. The hotter wax is more likely to smear color directly beneath it, so use this tip carefully.

5. If I am putting down more than one layer of smooth was, I alternate the direction of my strokes with each layer. I load my brush, keeping it nice and hot, then use one sweeping stroke to cover the entire width of the painting. Then I apply a stroke beneath that one, etc. When that layer is done I turn my painting a quarter turn, and put down another layer, etc. I fuse every two thin layers as I go.

6. Many artists use a “pour” method for their paintings. They tape the edges of their painting to create a lip that comes up to create a clean edge. Then pour the hot wax onto the surface. The drawback is that this can melt and/0r pit the surface of any painting beneath the pour. This is worth experimenting with, though, as I’ve seen some really beautiful work done this way.

6. Some artists use a solvent at the very end to smooth the surface. You can put a bit on a rag and rub the surface. What I’ve noticed about this technique it that it creates a matte finish. The painting must be buffed periodically to maintain a glossy finish.

7. Which brings us to buffing. You’ve created your smooth surface, and you want to make it look glassy? Clean, lint free rags work. I like to use white t-shirts that I get from the thrift store, wash and dry, and then cut up. Another option is to use chamois, which is completely lint-free, and can work up a high shine. You don’t need anything but your buffing rag and some patience. Work on small sections at a time, rubbing lightly in small circles. This is a great way to “polish” your finished piece.

What about you? do you have any smooth surface tips you’d like to add? Leave a comment, and add to the list.

Inspiration and Ownership

 In the words of Thomas Jefferson, “He who receives an idea from me, receives instruction himself without lessening mine; as he who lights his taper at mine receives light without darkening me.” An idea is not diminished when more people use it. 

(from creative commons website)

I love the quote above. Such a good reminder.  In this time that we live in, when there seems to be a mad rush to define everything as private or corporate property, it can seem a little odd, or risky even, to just….. well, give things away. And I’m only human. What if someone “steals” an idea from this website and uses it for their own work? I can get carried away by that worry, from time to time. I’ve also talked to other artists who fear something being taken from them when they post their images or techniques online. But that in itself implies that we all “get” our ideas and “produce” our images in a vacuum. The fact is, we are all, every day, influenced by ideas and images out there. We can’t help it. 

Notice I put the words “steals”, “get” and “produce” in quotes- these are all concepts of ownership. And it really begs the question: are we the static “owners” of our ideas, or are we only the temporary guardians of our ideas before the go out into the world in their viral fashion, and produce more ideas?

 I am reminded of something that my favorite drawing teacher once told us- that we each have our own mark, our own hand. For better or worse, I could try and try to make a mark like you, but it would always still look like my mark. It would look like me trying to make a mark like you, but me still being me, it would most definitely be my mark. 

An important and intriguing thing to think about: how do we walk that line between individual protections, and protecting the open sharing ideas, which fuels all creativity?

“New Works ‘09″ show at Enso this month

I’m happy to share with you all that I’ll be hanging a show of new work at Enso gallery this week, which will run through the month of September. Enso is actually a yoga studio as well, run by an amazingly generous and creative local couple, and they run a very nice gallery space, right by the ocean here in Half Moon Bay. So if you are in the area, come check it out. 

Where:  Enso, 131 Kelly Ave. Half Moon Bay, CA

When: Please join us for an opening reception September 12, 4-6 p.m. There will be light food and drinks. The show will run the whole of September. Check the schedule at http://www.ensohmb.com for gallery availability. Generally, the gallery is open to the public before and after yoga classes. 

If you are coming from out of town, and want to make sure that you see the show, email me directly, and I’ll try to arrange a time to open the gallery for you. 

Hope you can make it!